Home > Manuli-EQUATOR/1 (BLACK)

EQUATOR/1 (BLACK)
Click to View PDF


APPLICATIONS & FLUIDS

  • Hydraulics: low-medium pressure lines in extreme temperature conditions (foundries, compressors, hydraulics within engine compartments, etc.)
  • Mineral oils, glycols and polyglycols, transmission fluids, air with oil vapours, mineral oils in aqueous emulsion (up to 212°F/100°C)

CONTINUOUS SERVICE TEMPERATURE RANGE
-55 °C, -67 °F
135 °C, 275 °F
MAX OPERATING TEMPERATURE
150 °C, 300 °F

MAX OPERATING TEMPERATURE
150 °C, 300 °F

TUBE: Oil resistant synthetic rubber

REINFORCEMENT: One high tensile steel braid

COVER: STANDARD – TYPE "XT"
Synthetic rubber with high ozone, weather and heat resistance

APPLICABLE SPECS: Exceeds EN 853 1SN; SAE 100 R1AT; ISO 1436 1SN/R1AT

TYPE APPROVALS: ABS; DNV-GL; CU-TR; LR; MSHA; DNV-GL(MED)

KEY FEATURES

  • Wide range temperature resistance
  • EN/DIN and new SAE pressure rating
  • Outstanding ozone resistance
  • Superior weather and UV resistance
  • High aging resistance

REMARKS

  • Compressed air applications require cover pin-pricking and additional safety devices. High pressure compressed air applications must be carefully analysed to verify the suitability of the hose, contact Manuli Hydraulics Help Desk for technical guidelines.
  • Equator hose is not suitable for high temperature water applications
  • Equator hoses are not designed and not approved for “air brake” applications on railway and/or mobile equipment
    • .